What I used:
- Base coat (not shown)
- Blush by e.l.f. (part of Necessary Nails collection)
- Shield by Wet n Wild
- Wet Sand by Maybelline New York
- generic quick dry top coat
What I did:
Step 1: Base coat (I already had this on from the earlier design, but if you’re starting from blank nails, you will want to add a base coat).
Step 2: Apply two coats of Blush by e.l.f. to the whole nail (also already on from the earlier design).
Step 3: Apply two coats of Shield to the nail tip.
Step 4: Apply one thin layer of Wet Sand to the whole nail, leaving the Blush showing through the gold at the base of the nail.
Step 5: Paint two thirds of the nail (from tip toward base) with Wet Sand again.
Step 6: Paint a thin layer of Shield over the tip again.
Step 7: Cover with top coat and let dry.
See all the posts in this series: